36V 25A 43.8V 25A Lifepo4 Battery Charger Electric vehicle charger
Features:
1. Long cycle life
2. High Safety
3. Wide temperature range
4. Environmental friendliness
5. IP67
6. With reverse connection / short-ciruit / over heat/ low voltage / over voltage protection
Water proof IP67 charger 36V 25A Charger 1500W
Parameter Table:
| Product Type | Lithium Iron Phosphate Battery Charger |
| Brand Name | Benergy |
| For Battery Pack | 36V (12S) Lifepo4 Battery Pack |
| Charge Voltage | 38.4V |
| Charge current | 25A |
| Size | 282×146×82mmmm (L,W, H) 11.1*5.75*3.23" |
| Weight | 3000g±50g 6.61 lb |
| Charge Mode | CC/CV (Continuous current/Continuous Voltage) |
| Warranty | 1 Year |
| OEM/ODM | Yes(Accepted) |
Main product specification:
Max.output power | Input voltage | Output voltage | Combined regulation | Output current | Combined regulation |
| 1400W | 80-264Vac | 43.8V+/-0.2Vdc | +/-0.2V | 25A | +/-3A |
Input characteristic:
| No. | Item | Technical specification | Remark |
| 1 | Rated input voltage | 230Vac | 230Vac |
| 2 | Input voltage range | 90 ~ 264Vac | |
| 3 | AC input voltage frequency | 50～60 Hz |
Output characteristic or charge stages
No. | Item | Technical specification | Remark |
| 1 | CC(constant current) | ≤43.8Vdc, 15A | |
| 2 | CV(constant voltage) | 43.8Vdc, 4A↓ | |
| 3 | Float stage | No | 5%CC |
| 4 | Power efficiency | ≥85% | Vin=230Vac,rated load |
Protection characteristics
No. | Item | Technical specification | Remark |
| 1 | Over voltage protection | Yes | |
| 2 | Software over voltage protection | The charger software limits the maximum output voltage to a level suitable for the connected battery system. | |
| 3 | Thermal protection | Yes | |
| 4 | Current limiting protection | Yes | At CC mode |
| 5 | Short circuit protection | Short circuit protection should be automatically recovery after remove the condition. | |
| 6 | Reverse polarity protection | When output wires are reversely connected to the battery the charger will not operate and will work normally when DC wires are correctly connected. |
The shell of Benergy chargers adopts integrated die-casting structure; the inner part of the charger adopts glue-filling process.
It is suitable for flooded battery, sealed (VRLA gel) lead-acid batteries, lithium batteries, NI- MH batteries, NI- CD batteries, etc.
Detail size:
Input connector (selectable):
Output connector (selectable):
Applications
Benergy chargers can be used for various battery packs of electric cars, motorcycles,sightseeing cars, cycle charging cars, forklifts, communications, electric power, ships, etc.
Packages:
Certifications
Don't hesitate to contact us for any questions or concerns - we're here to help!
sales@benergytech.com
what's app: +86-18078821674